The Mictrack MT710 has a 650mAh backup battery that’s replaceable. If you need to swap it out, this post will show you how to remove the battery safely.
Power OFF Device
- Please make sure the device is POWER OFF.
- If the device is Power On, press and hold the SOS button for 8 seconds to Power OFF
Open Back Cover
- Remove the screws and open the back cover.
Remove Backup Battery
- Press down on one corner of the white battery holder (1 in the image below)
- Gently pull the battery cable(red/black) upwards to slowly remove the battery(2 in the image).
How To Remove the MT710 Battery
Install Backup Battery
- Insert the battery into the battery connector in the correct direction.
Please notice the MT710 battery wiring direction (as shown in the following image); if the direction is wrong, it may break the PCB.
MT710 Battery wiring direction
How to Install the MT710 Battery